The Anycubic Photon D2's exceptional print quality and detail mean it's the new go-to printer for miniature and jewelry enthusiasts.
Make sure the bed is loose and there is a piece of paper on the glass to avoid damaging it and to level the bed. Apply gentle pressure to the bed after it has settled before tightening the four screws that hold it in place. When you're done, go back to the main tools menu and press z=0 to save the level. When finished, press enter again to raise the bed. Install the resin vat, load the resin and start printing.
The photon line has always been relatively easy to set up. The most important factors to consider will be your exposure times and lift speeds. The user manual for Anycubic's DLP craftsman resin includes time and speed recommendations. Design wise, there isn't much to say about the Anycubic Photon D2 if you're familiar with resin 3d printers - it's a relatively compact printer measuring in at 17.2 x 9.3 x 8.9 inches. There is a 2.8 inch touchscreen on the front of the device and the connection ports are on the side.
In terms of appearance, the Photon D2 is similar to the previous Photon Ultra, with a blue-tinted UV cover - not the typical yellow covers for which Anycubic is known. The 2.8" touch screen is also clear and easy to navigate, making menu navigation and model selection simple.DLP 3D printers use a digital projector screen to flash an image of a layer across the entire platform, curing all points simultaneously.
It’s very similar to SLA with one significant difference -- where SLA machines use a laser that traces a layer, a DLP machine uses a projected light source to cure the entire layer at once. The part is formed layer by layer. It could directly to the bottom of the resin vat and could provide evener light and realizing the high precision printing results.
South Africa Latest News, South Africa Headlines
Similar News:You can also read news stories similar to this one that we have collected from other news sources.
Ralph Nader Thinks People Aren’t Paying Attention to His Progressive AgendaThese days, Ralph Nader’s marginality is proving to be more of a source of frustration than of pride. Even the most progressive members of the Democratic coalition won’t take his phone calls.
Read more »
NYCFC dominates run of play, but falls to New England for third straight lossNYCFC dominates possession and shots, but problems finishing and defending contribute to third straight loss, 3-0 to New England on Sunday night.
Read more »
We Ride in Toyota’s Hydrogen-Powered Big RigHydrogen fuel cell trucks could be the quiet revolution
Read more »
Oakland A’s could get veteran outfielder back for upcoming homestandOakland A’s outfielder Ramón Laureano could return to the club next week after a short rehab assignment with Low-A Stockton
Read more »
Oakland A’s move veteran right-hander to bullpen, then see rookie starter shineAdrián Martínez struck out four over six scoreless innings as Oakland A’s finished a week-long road trip with win over Baltimore Orioles at Camden Yards.
Read more »
California’s network of 124 Marine Protected Areas is ready for its 10 year reviewCalifornia reviews its Marine Protected Areas network every 10 years, with the first review set to occur in December.
Read more »